1. Make sure you surface is dry and flat. Your subfloor should be solid smooth and clean from debris.

2. MAGNEWOOD does not need to acclimate to the environment but the sub floor surface should be dry. See the MAGNEGLUE installation instructions on the MAGNEGLUE page of the web site.

3. Find the direction you intend on installing the floor and its recommend you start on the longest wall.

4. Apply the adhesive using the manufacturers recommended notch trowel while not getting too ahead of yourself.

5. Lay out the flooring over the applied adhesive firmly pushing the tongue and groove together in a random pattern while keeping the short joints no closer the 6 inches apart from each other.

6. Use a standard chop saw and table saw with regular wood cutting blades. It is recommended to use a shop vacuum attached to both saws to reduce the dust.

7. MAGNEGLUE easily cleans up. See the "MAGNEGLUE" page of the web site for technical data